Abstract Rubber blends are important materials in automotive industry, as well as in other sectors. However, there are implications when suitable use of a polymer in an artifact is not made. In the automotive area, for example, the use of an elastomer without the fuel resistance requirement would result in component degradation, potential fuel leakage, and danger of fire. The use of polymer blends may be the solution to this problem. Fourier transform infrared spectroscopy (FT-IR) can be used for the knowledge of the polymer content of these blends. Then, FT-IR quantitative methodologies for determining acrylonitrile-butadiene copolymer (NBR) copolymer and butadiene-styrene copolymer (SBR) contents were developed by the transflectance accessory, NIRA, and the transmission mode, being the sample analyzed by transmission and universal attenuated total reflection (UATR) in the medium infrared (MIR). UATR and NIRA methodologies showed better accuracy. However, the MIR analysis showed a detection limit between 10-20% of NBR.

Abstract It is a well-established fact that rubber accelerator is essential to provide solution in different sectors. However, there is a reversal process which can reduce the material performance. Sulfur accelerators donors and organic peroxides have been presented as a solution to the problem. The methodology development that can separate or characterize those components is a challenge and still allows gaps, explained by the application of conventional technique to reach this goal. This study aimed at contributing to the use of off-line coupling of thin layer chromatography (TLC)/infrared spectroscopy (IR) by Universal Attenuated Total Reflection (UATR) for analysis of N-cyclohexyl-2-benzotiazolsulfenamide (CBS), tetraethylthiuram disulfide (TMTD) and dicumyl peroxide (DCP), in natural poly-cis-isoprene (NR) formulations, containing naphthenic oil. The best results were obtained for the plasticizer and DCP, in formulations that had a greater proportion of these compounds. The separation of CBS and TMTD was made with less effectiveness, due to bands overlapping.